Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

EightByEight Windows 10 Drivers

Hey all, I was wondering if there's any instructions to get an EightByEight installed on a Windows 10 machine. I seem to be able to get the serial driver installed, but not the DFU. I have Pattern Paint 2.0.3 installed, but there does not seem to be any compatible drivers for the EightByEight. When I click on 'system info' from the help menu, it detects the Blinkinlabs EightByEight on COM7, but there are no detected blinkies listed. Any help would be appreciated. Cheers,

Comments

  • Hi! At the moment, the EightByEight is only working with Arduino as a programmable badge. We'll have support for it in PatternPaint soon, though. For Windows 10, the Microsoft-supplied TTYACM driver in Windows 10 should be compatible with the serial port, so the port is showing is a good place to start. The DFU driver is only needed to upgrade the firmware on the ARM part (that's creating the serial port, and doing the low-level driving of the matrix). We do have a driver for the serial port, DFU, and DFU in bootloader mode here, however it looks like the signature isn't correct- I'll regenerate that and post again when it's up: https://github.com/Blinkinlabs/EightByEight/tree/master/driver
  • Ok, they should be updated and signed correctly now. On a fresh Windows 10 machine, I had to run device manager, and then manually select the 'Update Driver Software' option.
  • Matt, thank you so much!! These products are awesome btw =)
Sign In or Register to comment.