BlinkyPendant — Blinkinlabs Forum

How do I remove the images?

q325mg — Wed, 12 Dec 2018 22:58:32 +0000

I updated to the latest firmware with
sudo dfu-util -d 1209 -D pendant-firmware-v300.dfu

pendant-firmware-v300.dfu I got it from here and I am using Pattern Paint v2.4.1

I was able to add images but now I want to remove them or maybe restore the original images, sorry If this is a basic question but I could not find how to do it.

Thanks

BlinkyPendant

redxeth — Sat, 04 Jul 2015 03:22:18 +0000

Any chance to get a forum up for BlinkyPendant up soon? Wondering how I can store more than one image besides having to hack it. Seems I can only replace the 8th image on the Pendant.

Program Blinky Pendant more like Blinky Tape?

punktual — Thu, 17 Mar 2016 10:58:07 +0000

I was wondering if it possible to program Blinky Pendant so it functions more like Blinky Tape.... that is so that it just cycles continuously through a pattern rather than being activated by motion?

I'm a bit of a noob but any help would be appreciated.

BlinkyPendant not recognized by dfu

Penth — Sat, 31 Oct 2015 18:19:25 +0000

I'm trying to hook up an program my blikypendant for the first time, using the code in commit 3e3f490 under Ubuntu 14.10. The device comes up as 1209:8888 if plugged in in standard mode, or 1209:8889 if plugged in in bootloader mode by pressing the select button, but dfu-util cannot open it in either case. The current firmware is the one loaded for the Open Hardware Summit.

 ~/git/BlinkyPendant/firmware$ make install 
 dfu-util -d 1209 -D pendant-firmware.dfu
 dfu-util 0.8

 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
 Copyright 2010-2014 Tormod Volden and Stefan Schmidt
 This program is Free Software and has ABSOLUTELY NO WARRANTY
 Please report bugs to dfu-util@lists.gnumonks.org
 
 dfu-util: Cannot open DFU device 1209:8889
 dfu-util: No DFU capable USB device available
 Makefile:90: recipe for target 'install' failed
 make: *** [install] Error 74

Also note that there's a typo in animation.cpp where '#include "Animation.h"' should be '#include "animation.h"' in order to prevent a file not found error on case-sensitive systems.

BlinkyPendant bare metal programming

Matt Mets — Sun, 18 Oct 2015 03:32:48 +0000

This discussion was created from comments split from: BlinkyPendant.

I cant upload a new pattern

Matthew — Sat, 17 Oct 2015 03:07:59 +0000

Hello! I recently got a BlinkyPendant, and I have been playing around with it for a while, I even made some custom patterns on Pattern Paint on windows 10. But just today, my new custom patter that I just made wont show. So I tried testing with smaller patterns and those wont show on the pendant either. I tried switching cables, this time my computer read that the pendant was plugged in; but I still cannot put new patterns on it. I have also heard of a way to reset the BlinyTape, but is there a similar method for the BlinkyPendant?