Remon
About
- Username
- Remon
- Joined
- Visits
- 47
- Last Active
- Roles
- Member
Comments
-
Any update on releasing code for this?
-
Project objective done Besides a cool Disco wall, a Xmas message board. Happy Xmas!! The end result (for now): https://www.icloud.com/photostream/#A4532ODW3z;745B0B06-EBFA-409F-9277-F005BBDDC823 -- The code is basically a re-used ticker script,…
-
awesome, so this can be used to run more complex things on the Arduino itself, standalone. Right ?
-
This feels spammy; but the wall plate is done, so another update. blinkymatrix+ambitape script = disco wall \0/ https://www.icloud.com/photostream/#A4532ODW3z;9998AD6A-E553-4343-91EC-56075DBBD0B8 https://www.icloud.com/photostream/#A4532ODW3z;…
-
that works fine, and the lego is permanent btw. It makes it easy to change the layout, and reuse the leds later. I will glue another block or piece of lego plate to the project so I can easily detach them. I'm no code wizz, so using native layouts i…
-
So, I just learned about the processing pixel array.... That would have been good to know before actually. So next up is a little re-ordering of the pixels LEDs to form an array of 5 x 12, this way the LEDs are ordered the same as processing native…
-
small update Things are coming together, or rather 'apart' actually. The blinky-tape evolved to blinky-matrix now, and the setup is still crude, and not yet made waterproof. I'm inserting 20cm wire between each led so I can create a larger setup. …
-
Thanks, figured so much. Ok, can you confirm that processing 2.2.1 also works well for BT ? So that I'm not chasing ghost issues http://blinkinlabs.com/blinkytape/processing/ states to use 2.0.2, but thats not marked as a stable Processing release.