davidnash

Comments

• Not a problem, thanks Threeethan, will check it out. Edit: Flashed the production sketch, processing is working correctly now, I can modify code and run it without unplugging the blinkytape.

  in Processing example on Ubuntu linux - can only run once, then need to replug usb Comment by davidnash October 2014
• Hi Threeethan I've installed Arduino and followed the instructions on http://blinkinlabs.com/blinkytape/arduino/ Have have the board set to Leonardo and got the serial post from the dmesg output. When I upload ColorSwirl the blinkytape goes dark.…

  in Processing example on Ubuntu linux - can only run once, then need to replug usb Comment by davidnash October 2014
• Thanks Threethan. Just looking at this again. Since I posted I've done a clean reinstall of linux and now I'm on Ubuntu 14.04. I no longer see the cdc_adm error message in dmesg but get the same behaviour - I need to replug the blinkytape for the e…

  in Processing example on Ubuntu linux - can only run once, then need to replug usb Comment by davidnash September 2014