It looks like you're new here. If you want to get involved, click one of these buttons!
Blinky Pixels shows the wrong color
edited December 2014
The colors on my Blinky Pixels seem to be mixed up, a fully green image in pattern paint shows red and vice versa. Is that a known issue?
Hmm, that's quite odd...
Which method are you using to change the image? Patternpaint?
Sorry to chime in so late but I ran into the same problem. I wasn't using PatternPaint but using Arduino code using the FastLED library. What I noticed was that the color order for the BlinkyPixels and the BlinkyTape is different so when the addLeds method was called, I had to change the color order from GRB to RGB. ie:
LEDS.addLeds(leds, LED_COUNT); // this configures the BlinkyBoard - leave as is.
I also changed the LED type to WS2811 but don't know if that made any difference. I just know the code I had for my BlinkyTapes on my Christmas tree worked great on the BlinkyPixels once I made that change (and number of LEDs total).
Thanks for catching this! The test images I used were all multicolor, so it wasn't obvious at first. We'll make a note of that in the documentation, and I'll see about adding a BlinkyPixel mode for PatternPaint as well.
Powered by Vanilla